← PilotDial

Support

Short answers to the common questions. Anything else: support@pilotdial.com.

Setting your home aerodrome

On the watch: open PilotDial, go to Settings and choose the home aerodrome. Type its ICAO code (for example LSZK) or pick it from “Nearest aerodromes”, which uses your current position.

On the phone: open the PilotDial phone app and search by ICAO code or name. The setting syncs to the watch.

With Pro you can add up to five more aerodromes, for example your alternates.

Why the METAR station is a different aerodrome

Many small aerodromes do not publish a METAR or TAF. PilotDial then uses the nearest station that does, and shows its identifier next to your aerodrome, for example LSZK (LSMD): Speck-Fehraltorf with the Dübendorf report.

A METAR gives the cloud base above the station. When the station lies higher or lower than your aerodrome, PilotDial converts the ceiling to height above your aerodrome before comparing it with your minimums. Wind, visibility and weather are used as reported; local conditions at your field can differ.

What MARG means

MARG (marginal, amber) means one of these:

Open the app to see which item caused it. NO-GO (red) means a value in the current METAR is beyond a limit, the report contains severe weather such as a thunderstorm, or it is night and you are not night-rated. A forecast alone turns the badge amber, not red, so read the TAF yourself.

Standard minimums

The free version uses these values. With Pro you can set your own.

Standard minimums and marginal ranges
ItemNO-GO beyondMARG within
Ceilingbelow 2000 ft AGL1000 ft
Visibilitybelow 8 km2 km
Windabove 20 kt3 kt
Gustsabove 25 kt3 kt
Crosswindabove 10 kt3 kt
Tailwindabove 5 kt1 kt

“MARG within” is the distance from the limit that turns the badge amber, for example a crosswind of 8 to 10 kt. A gust spread of more than 12 kt, CB or TCU in the report, and fog, mist, snow or moderate rain also count as marginal. Unless you mark yourself as night-rated, the last 30 minutes before the end of civil twilight are marginal and after it is no-go.

These are conservative defaults for a VFR pilot, not a recommendation for your aircraft or experience. Set limits that fit you.

Adding PilotDial to any watch face

PilotDial provides complications for go/no-go, crosswind, daylight, UTC, QNH, flight time and METAR. To add one, touch and hold your watch face, tap Edit (or the settings icon, depending on your watch), select a complication slot and choose an item under PilotDial. The exact steps differ slightly between Pixel Watch and Galaxy Watch. The crosswind dial needs Pro.

The PilotDial watch face has these slots already filled. You can install it from Google Play.

How the logbook detects take-off and landings

You tap block off and block on. In between, the watch uses simple GPS rules:

GPS on a watch is not perfect. A fast taxi, a low pass, a poor GPS signal under a sleeve or a high-wing, or a very short touch-and-go can be counted wrong or missed. Check the landing count after each flight and correct it in the logbook before you copy it to your official logbook.

Restoring Pro

Pro is tied to the Google account you bought it with. On a new phone or watch, sign in to Google Play with that account and open PilotDial; the purchase is checked when the app starts. On the phone you can also tap Restore purchase in the settings. If you have both apps, the phone and watch share the Pro status. If Pro still does not appear, write to us with the Google Play order number (it starts with GPA.).

Contact

support@pilotdial.com · Ameria AG, Switzerland. Please include your watch model, the app version if you know it, and the aerodrome concerned.

PilotDial is a decision aid, not an official weather briefing. Always do a full weather and NOTAM briefing before flight. The pilot in command decides.